Wuxi CMC Machinery Co.,Ltd
Jiangsu CMC Machinery Co., Ltd. (original name: Wuxi CMC Machinery Co., Ltd.) The Most Professional Light Pole Machine Manufacturer Exporter: Nantong CMC Machinery Co., Ltd.
Add to Cart
ISO9001 350H beam Highway Barrier Roll Forming Machine
I.Product description
| 1 | Model No. | High Speed Floor Deck Steel Roll Form Machine |
| 2 | Thickness | 0.3-0.8mm |
| 3 | Coli material | GI |
| 4 | The bearing capacity of manual decoiler | 6.5 tons |
| 5 | shaft material | 45#steel |
| 6 | Out diameter | Customized |
| 7 | numbers of forming steps | Customized |
| 8 | transmission | chain transmission |
| 9 | Forming speed | 8-12m/min |
| 10 | main motor power | 3kw |
| 11 | voltage | 380V50HZ Three-phase or as required |
| 12 | dimension | 7*1.3*1.3 |
| 13 | cutting | hydraulic cutting |
| 14 | blade material | Cr12 steel with quenched treated 60-62°c |
| 15 | control system | PLC(Delta) |
| 16 | length tolerance | ±1mm |
| 17 | spare parts | 1 easy demaged parts:conk 2pcs, fuse-link 4pcs 2 rubber mat: 1 pcs 3 bolt spanner: 1 pcs |
| 18 | The whole line including: Manual decoiler, roll forming machine, hydraulic station, hydraulic cutter, PLC control system, run-out table. | |
II.Basic machine parameters
Material: Q345B galvanized sheet
Thickness: 2.5～3.0mm
Width: 450-476mm
Weight: 65KG
Specifications of products
Product: by product drawing
Product width: 310mm ± 5mm
Product height: 81mm ± 5mm
Product specifications
Forming method: Cold roll forming
Production speed: ≤10m / min
Feeding direction: left feed
Main voltage: 380V, 50Hz
Unit total power: about 20.7KW
Drive shaft bearing: 6026
Turbo lift: SWL10-3 / 23-FU3
Main drive motor: YVP180M-4-15
Reducer: ZQ500-48.57
Wallboard material: A3
Shaft material: 40
Mold material: Gcr15
III,Overview of equipment structure
The equipment frame is processed by A3 steel plate, after aging treatment, 3-roller structure, 1 upper and 2 lower, the lower roller adopts a fixed structure, the upper roller adopts slider movement adjustment, and 3 sets of turbine box drive are driven by the motor to adjust the upper and lower The turbine box is connected by a connecting rod to ensure the synchronization of 3 sets of boxes, and the 3 independent wall plates are connected by a shaft to ensure the parallelism of the whole machine. The diameter of the roller shaft is 110mm. There are two sets of molds on the left and right, one for the inner arc and one for the outer arc, and a set of 15KW main motor. It is driven by a ZQ500 reducer, which drives the left and right lower shafts through gears.The gear module is 10m, one for each left and right.The product is processed through the operation console.
IV,Equipment configuration checklist
| No |
Part Name |
Quantity |
| 1 |
Forming mould |
One set of molds on each side |
| 2 |
15KW drive motor |
1Set |
| 3 |
Forming mold shaft |
3Sets |
| 4 |
Turbo lift |
3Sets |
| 5 |
Lifting drive motor |
1Set |
| 6 |
ZQ500 reducer |
1Set |
| 7 |
Electrical console |
1Set |
| 8 |
Equipment anchor bolt |
1Set |
V.Equipment structure diagram:
